Sheet metal Vacuum Lifters

Specialists in vacuum lifters for sheet metal, stainless steel, aluminum and other materials: not just words, but concrete advantages for your work. Compact but sturdy structures to last over time, reinforced with tie rods for greater support, vacuum lifters with modular configurations allow the lifters to be used on any size. Load and operator are always protected with Righetti Vacuum Lifters systems.

Sheet metal, stainless steel, aluminum, and non-iron material Vacuum Lifters

Our Vacuum Lifters for sheet metal, stainless steel, aluminum and non-ferrous materials are complete with a series of vacuum monitoring systems to ensure the lifting of the load in maximum safety. The suction cup units of Righetti Vacuum Lifters have a sturdy but at the same time compact and slender structure. Righetti Vacuum Lifters’ for sheet metal, stainless steel, aluminum and non-ferrous materials are also used to speed up work times and reduce costs due to load handling. The technology has allowed Righetti Sollevamenti to create a system of springy and articulated suction cups for sheet metal, which will also adapt to not perfectly flat loads, managing to compensate for the natural non-flatness of the load.

Compressed air powered sheet metal Vacuum Lifters

The models with compressed air operating system are the ideal solution for use on jib cranes or other lifting means, where there is a pneumatic connection. In addition to the standard models, we made customized and tailor-made Vacuum lifters.

See the full range
pneumatic Vacuum Lifter for metal sheets, aluminium, iron material mod. FS6A 500

FS6A 500

  • Lifting capacity 500 kg
  • Compressed air operating system
  • 6 suction pads d.200 mm
  • Lower below-the-hook
See
pneumatic Vacuum Lifter for metal sheets, aluminium, iron material with telescopic frame FTS6-A 1000

FTS6A 1000

  • Lifting capacity 1000 kg
  • Compressed air operating system
  • 6 suction pads d.310 mm
  • Telescopic frame for horizontal lifting of metal sheet
See
Pneumatic Vacuum Lifter for metal sheets, aluminium, iron material mod. F8A 1500

F8A 1500

  • Lifting capacity 1500 kg
  • Compressed air operating system
  • 8 piastre d.310 mm
  • Frame from L 3000 to 4000 mm
See
pneumatic Vacuum Lifter for metal sheets, aluminium, iron material mod. F10A 2000

F10A 2000

  • Lifting capacity 2000 kg
  • Compressed air operating system
  • 10 suction pads d.310 mm
  • Frame from L 3000 to 4000 mm
See

Electric sheet metal Vacuum Lifters

The sheet metal Vacuum Lifters with electric operating system are the ideal solution for use on overhead cranes or other lifting means. In addition to the standard models, we made customized and tailor-made vacuum lifters.

See the full range
Electric Vacuum Lifter for metal sheets, aluminium, iron material mod. FS6 EB 500

FS6EB 500

  • Lifting capacity 500 kg
  • Electric operating system
  • 6 suction pads d.200 mm
  • Lower below-the-hook
See
Electric Vacuum Lifter for metal sheets, aluminium, iron material with telescopic frame mod. FTS6EB 1000

FTS6EB 1000

  • Lifting capacity 1000 kg
  • Electric operating system
  • 6 suction pads d.310 mm
  • Telescopic frame for horizontal lifting of metal sheet
See
Electric Vacuum Lifter for metal sheets, aluminium, iron material mod. F10-EB 2000

F10EB 2000

  • Lifting capacity 2000 kg
  • Electric operating system
  • 10 suction pads d.310 mm
  • Frame from L 3000 to 5000 mm
See
Vacuum Lifter for big and jumbo metal sheets powered by electric system F20EB-5000

F20EB 5000

  • Lifting capacity 5000 kg
  • Electric operating system
  • 20 suction pads d.390 mm
  • Frame for horizontal lifting
See

Battery powered sheet metal Vacuum Lifters for

Righetti Vacuum Lifters offers a range of self-powered Vacuum lifters for the handling of metal and non-ferrous sheets with built-in batteries, which guarantee the machine to work in full autonomy and in maximum safety.

See the full range
Vacuum Lifter for metal sheets, aluminium, iron material mod. FS6-B 500

FS6B 500

  • Lifting capacity 500 kg
  • Battery operating system
  • 6 suction pads d.200 mm
  • Lower below-the-hook
See
Vacuum lifter for metal sheets with battery operating system with telescopic frame mod. FTS6 B

FTS6B 1000

  • Lifting capacity 1000 kg
  • Battery operating system
  • 6 suction pads d.310 mm
  • Telescopic frame for horizontal lifting of metal sheet
See
Vacuum lifter for metal sheets with battery operating system mod. F8B

F8B 1500

  • Lifting capacity 1500 kg
  • Battery operating system
  • 8 suction pads d.310 mm
  • Frame from L 3000 to 4000 mm
See
Technical features Vacuum Lifter for metal sheets, aluminium, iron material mod. F10-B 2000

F10B 2000

  • Lifting capacity 2000 kg
  • Battery operating system
  • 10 suction pads d.310 mm
  • Frame from L 3000 to 4000 mm
See

Special solutions for sheet metal

Righetti Vacuum Lifters designs and creates models of Vacuum Lifters for metal sheet specific for particular uses, such as lifting pipes and beams, tanks, coils or other. Each Vacuum Lifters can be perfectly customized for every need.

See the full range
Special Vacuum lifter for tanks

Specific Vacuum lifter for tanks

  • Special Vacuum lifter for tanks
See
Bilancini di sollevamento a ventosa per travi in ferro

Vacuum Lifter for tubulars and beams

  • Special Vacuum lifters for tubulars and beams
See
Bilancini di sollevamento con ventose per materiali speciali

Vacuum Lifter with chain connection

  • Tailor made Vacuum Lifter with chain connection
See
Do you need help to choose the right Vacuum Lifter?

Do you need help to choose the right Vacuum Lifter?

Let us know your needs and we will guide you in the right direction.
Visit our page, select and fill in the information according to your requests.

Get your Vacuum Lifter